2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale
2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale__right
2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale_top
2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale__after
2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale__below

Compatible Devices
Vortex
Brand
Vortex
Material
Aluminum, Carbon Fiber
Tripod Head Type
Ball Heads
Item Weight
7.3 Pounds


The Radian Carbon changes the rules when it comes to fusing finesse and strength, combining aluminum and carbon fiber for an extreme strength-to-weight ratio. With an integrated level and 1mm marks for ultra-precise adjustments, plus your choice of a quick-release Ball Head or Leveling Head, you can swap out all your long-range tools quickly.


Adjusting Leg Angles

Each of the four tripod leg sections can be adjusted out to 85°, 55°, or 25°.

To adjust the angle of the legs:

1. Pull the Leg Angle Pivot Lock out and adjust the leg to the desired angle.

2. Push the Leg Angle Pivot Lock back in and pull the leg out to the nearest angle stop.


Adjusting Leg Section Length

Each of the four tripod leg sections can be extended to adjust the tripod’s height.

To adjust the length of a leg section:

1. Twist the Leg Lock clockwise (when viewing from top) to loosen the tension.

2. Slide the leg section out to the desired length and twist the Leg Lock counter-clockwise (when viewing from top) to lock in place.


Attaching/Removing a Head

To mount a head to the tripod:

1. Lift the Quick-Release Locking Latch on the tripod.

2. Press and hold the Quick-Release Button and fully seat head into the tripod. Once seated, the head can be oriented in any direction.

3. Rotate the Quick-Release Locking Latch down to the locked position.

4. To remove the head, follow these steps in reverse order.

Attaching Optics to Ball Head

The Radian Ball Head uses Arca-Swiss style quick-release plates.

To mount your optic to the tripod:

1. Twist the Quick-Release Locking Knob counter-clockwise to remove the Quick-Release Plate.

2. Attach the plate to your optic. Be sure to tighten the Mount Bolt from the bottom side of the plate and flip the D-ring so it lies flat.

3. Place the Quick-Release Plate back into the tripod head and turn the Quick-Release Locking Knob clockwise to securely lock the plate in the head.

Tilt Action

The ball head’s tilt can be adjusted by unlocking the ball head. This allows you to position your optic at the desired angle. For extreme angle, or full vertical orientation, rotate the head into one of the two cutaways.

• To unlock the ball head, rotate the Ball Locking Knob counter-clockwise until the head moves freely. Adjust to your desired position and lock the ball head.

• To lock the ball head, rotate the Ball Locking Knob clockwise until you feel tension on the knob.

Panning Action

The Ball Head can be adjusted to allow you to pan across a scene without adjusting the ball head’s angle. This is particularly helpful while glassing wildlife moving across a field, maintaining a flexible position for your mounted rifle.

To use the Panning Base Knob:

• To unlock the panning base, twist the Panning Base Knob counter-clockwise.

• To lock the panning base, twist the Panning Base Knob clockwise. You may also adjust the drag of the panning base by tightening the Panning Base Knob, but not locking it down completely. This will allow you to have more control for smoother panning across a scene.

Adjusting Drag Tension

The drag tension can be adjusted on the Ball Head for when the head is in the unlocked position, allowing you to pan and tilt the ball head. This is helpful when viewing fast-paced action scenes. To adjust the drag tension, unlock the ball head by rotating the Ball Locking Knob counter-clockwise. Turn the Drag Tension Knob clockwise to increase the drag tension, or counter-clockwise to decrease the drag tension.

NOTE: Once the drag tension is set, it will stay at this tension no matter how much the Ball Locking Knob is loosened.

High Country II Tripod Kit Summit Carbon II Tripod Kit Ridgeview Carbon Tripod Kit Radian Carbon w/ Leveling Head Tripod Kit Radian Carbon w/ Ball Head Tripod Kit
Head Style 2-Way Pan Head 2-Way Pan Head 2-Way Pan Head Leveling Head Ball Head
Head Mount Arca-Swiss Arca-Swiss Arca-Swiss Arca-Swiss Arca-Swiss
Weight 4.0 lbs 2.5 lbs 3.2 lbs 6.1 lbs 7.3 lbs
Max Load 22 lbs 22 lbs 22 lbs 44 lbs 55 lbs
Min Height 11.3" 6.3" 8.3" 7.8" 8.3"
Max Height 62.5" 53.3" 73.8" 64.3" 67.3"
Folded Dimensions 24.3"x4.0" 18.1"x3.0" 29.0"x3.2" 25.5"x6.0" 28.0"x6.0"
Leg Construction Aluminum, Three Leg Sections, 3-Angle Leg Pivot Locks, Flip Lever Locks Carbon Fiber, Four Leg Sections, 3-Angle Leg Pivot Locks, 1/4-Turn Leg Locks Carbon Fiber, Three Leg Sections, 3-Angle Leg Pivot Locks, 1/4-Turn Leg Locks Carbon Fiber, Four Leg Sections, 3-Angle Leg Pivot Locks, Twist Leg Locks Carbon Fiber, Four Leg Sections, 3-Angle Leg Pivot Locks, Twist Leg Locks
Included Accessories Counterweight Hook, Rubber Feet, Rubber Packing Strap, Carrying Case Counterweight Hook, Rubber Feet, Rubber Packing Strap Counterweight Hook, Rubber Feet, Rubber Packing Strap Counterweight Hook, Rubber Feet, Stainless Steel Spiked Feet, Carry Case Counterweight Hook, Rubber Feet, Stainless Steel Spiked Feet, Carry Case

Features & details

Features

  • There’s no way something this precise should be this tough, but the Radian Carbon Tripod Kit with a Ball Head changes the rules when it comes to getting the utmost finesse out of a rock-solid platform.
  • Fully carbon fiber legs and aluminum construction make for an extremely high strength-to-weight ratio, supporting a 55 lb. max load while keeping the kit easy to pack.
  • Along with great strength, you get great precision with an integrated level; perfect for large binos, spotting scopes or as a rifle stand. Interchangeable rubber & spiked feet, 3-angle leg pivot locks, and a detachable counterweight provide stability.
  • Ball Head offers independent pan movement and tension control with an integrated level, 45° of tilt, and notches for up to 90°. Great for shooting/glassing at high/low angles, it allows greater elevation adjustment and the ability to level but still pan.
  • Swap out all your long-range tools quickly with the features you need, including Arca-Swiss compatibility and quick release. Whether you’re calling shots, or looking for a solid base for your rifle, the Radian Carbon makes sure you’re ready.

Product information Ball Head Kit

    Additional Information

  • ASIN: B08SBWFJRR
  • Best Sellers Rank:
    #1,057 in Complete Tripod Units
  • Date First Available: January 7, 2021

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale

2021 discount Vortex Optics new arrival Radian outlet online sale Carbon Tripod Kits online sale